Heavy duty and extremely high pressure, the Sundyne API Style Integrally geared multi-stage pump
Sundyne integrally gear driven multi-stage pumps are utilized by process engineers to manufacture fertilizer, urea and PTA. These pumps are able to safely reach extremely high pressures and will run reliably for 5 years without an overhaul. Up to four overhung impeller pump stages are powered by a single gearbox and motor resulting in energy and space savings. Sundyne multi-stage pumps generally utilize only 25% of the space and require much less maintenance than between bearing pumps and generate extremely high pressures.
Unlike conventional multi-stage pumps, Sundyne computer tailored hydraulics place the B.E.P. (best efficiency point) at the rated point resulting in optimum efficiency. An added benefit is reduced end-of-curve horsepower, allowing for smaller driver sizes resulting in energy savings.
- Flows to 1,800 gpm (410 m³/hr)
- Heads to 14,500 ft (4,420 m)
- Suction Pressure 1,000 psi (70 bar)
- Temperature Range -200 to 500°F (-130 to 260°C)
APPLICATIONS
- Fertilizer manufacturing
- PTA – Purified Terephthalic Acid
- Urea processing
Proven to be reliable, safe, compact and efficient, Sundyne HMP 7000 integrally geared overhung pumps with up to 4 stages provide a number of extremely high-pressure operational benefits:
- Multiple stage overhung pump according to API 610 – ISO 13709 design recommendations for integrally geared pumps
- Maximized up time
- Saves space-25% the size of competing multi-stage pumps
- ATEX certified
- Continuous operations for 5 years with no overhaul
- Barske impeller low NPSH technology
- Optimized pump engineering to meet the BEP – Best Efficiency Point to save energy through efficiency
- Safely reaches extremely high-pressures quickly
US 60 Hz
- Heads to 14,500 ft
- Flows to 1,800 gpm
- Standards API OH Style
- Number of Stages 2, 3 or 4
- Maximum Motor Power 4,000 HP
- Temperature Range -200 to 500°F
- Maximum Case Working Pressure 6,000 psi
- Maximum Suction Pressure 1,000 psi
- Maximum Viscosity 700 cp
- Maximum Size of Entrained Solids .015 inch
- Mounting Configuration Horizontal
- Seal Configurations Single, Double, Tandem
- Available Flanges 1500# RF or RTJ
- Suction Discharge Size 6″ x 6″
Metric 50 Hz
- Heads to 4,420 m
- Flows to 410 m3/hr
- Standards ISO and API OH Style
- Number of Stages 2, 3 or 4
- Maximum Motor Power 3,000 kW
- Temperature Range -130 to 260°C
- Maximum Case Working Pressure 414 bar
- Maximum Suction Pressure 70 bar
- Maximum Viscosity 700 cp
- Maximum Size of Entrained Solids 400 microns
- Mounting Configuration Horizontal
- Seal Configurations Single, Double, Tandem
- Available Flanges 1500# RF or RTJ
- Suction and Discharge Size 6″ x 6″
