HMD Kontro LMV-801S Vertical Low-Flow API 685 Pump

HMD Kontro LMV-801S Vertical Low-Flow API 685 Pump

Specifically for Low-Flow Duties

The LMV-801S combines the Sundyne Barske Wheel hydraulics with the HMD Kontro magnetic drive pump technology, providing a safe, reliable and efficient sealless pump solution for low-flow pump applications. It is built to comply with both the API 685 and API 610 standards and is engineered to eliminate product emissions and improve plant personnel safety, whilst delivering optimised low-flow performance with the time-proven Sundyne direct drive hydraulics.

The LMV-801S is dimensionally interchangeable with the traditional mechanically sealed LMV-801, and can be easily dropped into existing pipework – making this sealless upgrade possible without the need to modify piping and foundation layouts. Additionally, a plug-in version of the pump is available, enabling customers to swap out the mechanical seal drive end with the new sealless option without disconnecting the existing LMV-801 casing and diffuser from the piping.

Key Design Features:
• Barske Wheel hydraulics for optimum efficiency at low flows.
Compact vertical in-line design configuration.
• Directly interchangeable with the Sundyne LMV-801 providing an easy sealless upgrade path for existing installations in difficult-to-seal pump applications.
Fully compliant to the API 685 sealless centrifugal pump standard.
Total product containment with no leaks or emissions, improving operator safety and environmental protection.
No seals or seal support systems to maintain, reducing overall lifecycle costs.
Easy to install, commission, operate and maintain, with no requirement for special tools.

  • Flows to 380 gpm (86 m³/hr)
  • Heads to 720 ft (220 m)
  • Temperature Range -148 to 400°F (-100 to 205°C)
  • Design Pressure: 1,450 psi (100 bar)

APPLICATIONS

Chemical Processing

  • Chlor-Alkali
  • Isocyanates/Polyurethane
  • Agri-chemicals
  • Fine / Inorganic Chemicals
  • Sulfuric Acid

Hydrocarbon Processing

  • Hydrocarbons
  • Olefins
  • Aromatics
  • Methanol
  • Ammonia
  • Amines
  • Sour Water
  • Caustic
  • Alkylation

Upstream

  • Crude Oil
  • Sour Water
  • Caustic

Battery Manufacturing

  • Sulfuric acid
  • Potassium hydroxide

Biofuels

  • Bio-diesel
  • Ethanol

Food and Beverage

  • Edible Oils
  • Cocoa Butter

Mining

  • Sodium cyanide
  • Sulfuric acid

Hydrochloric acid

Pharmaceutical

  • Silicon oil (Heat transfer fluid)

Pulp and Paper

  • Chlorine
  • Sulfuric Acid

Semiconductor Manufacturing

  • Sulfuric acid
  • Potassium Hydroxide

Water and Wastewater Treatment

  • Sodium hypochlorite
  • Sodium hydroxide
  • Sulfuric acid
  • Ferric Chloride

US 60 Hz

  • Heads to                                                  720 ft
  • Flows to                                                   380 gpm
  • Standards                                               API 685
  • Maximum Motor Power                           100 HP
  • Temperature Range                                -148 to 400°F
  • Design Pressure                                1,450 psi
  • Mounting Configuration                           Vertical Close Coupled
  • Seal Configurations                              Sealless Magnetic Drive
  • Available Inducer                                        Yes
  • Available Flanges                            600#, 900#, 1500# ANSI RF
  • Suction and Discharge Size                3″ x 2″

Metric 50 Hz

  • Heads to                                                  220 m
  • Flows to                                                   86 m3/hr
  • Standards                                                API 685
  • Maximum Motor Power                           55 kW
  • Temperature Range                                -100 to 205°C
  • Design Pressure                                     100 bar
  • Mounting Configuration                           Vertical Close Coupled
  • Seal Configurations                                 Sealless Magnetic Drive
  • Available Inducer                                     Yes
  • Available Flanges                             600#, 900#, 1500# ANSI RF
  • Suction and Discharge Size                   3″ x 2″

About Sundyne

Sundyne is the world leader in delivering low-flow, high-head, integrally geared centrifugal pumps and compressors, sealless magnetic drive pumps and diaphragm gas compressors. Sundyne’s precision-engineered, highly reliable, safe & efficient pumps and compressors are used in chemical, petrochemical, hydrocarbon, hydrogen, carbon capture, renewable fuels, power generation and industrial applications. Sundyne pumps and compressors are available in API, ANSI/ASME, ISO, and other industry compliant designs.