| Maximum Flow |
10000acfm (17000am³/hr) |
| Maximum Speed |
50000rpm |
| Maximum Working Pressure |
4000psia (350bara) |
| Temperature Range |
-200 to 500°F (-130 to 260°C) |
| Maximum Motor Size |
4000hp (2983kw) |
| Hydro Test Pressure |
1.5 Times Maximum Working Pressure |
| Min Casing Thickness |
1.0inch (25.4mm) |
| Corrosion Allowance |
0.125in (3.18mm) |
| Impeller Clearance |
0.030-0.050in (0.76-1.27mm) |
| Shaft Diameter at Bearings |
1.5in(38.1mm), 2.0in(50.8mm) |
| Mechanical Seal Sizes-Outboard |
2.3in (58.4mm) |
| Mechanical Seal Sizes-Inboard |
2.3in (58.4mm) |
| Mounting |
Horizontal |
| Flanges |
150,300,600# ANSI RF standard, other ratings available |
| Suction Flange |
3 - 14 inches |
| Discharge Flange |
2 - 12 inches |
| Gearbox Oil Temp Range (normal) |
120 to 180°f (49 to 82°C) |
| Minimum Gearbox Starting Temp |
32°f (0°C) with light turbine oil - lower with approved synthetic oil |
| Gearbox Lubricant |
ISO VG-32 General Purpose Oil |
| Gearbox Sump Capacity |
400 Gallon |
| Gearbox Lube System |
Pressurized |
| Gears |
Hardened and precision ground, helical |
| Input & Idler Bearings |
Journal |
| Output Bearings |
Deflection Pad |
| Coupling |
Spacer Type |
| Materials of Construction |
Castings (carbon steel, stainless steel); Impeller (17-4PHSS, Titanium) |
