| Maximum Flow |
3550acfm (6030am³/hr) |
| Maximum Speed |
34200rpm-60Hz (33600rpm-50Hz) |
| Maximum Working Pressure |
1000psia (70bara) |
| Temperature Range |
-200 to 500°F (-130 to 260°C) |
| Maximum Motor Size |
450hp (335kw) |
| Hydro Test Pressure |
1.5 Times Maximum Working Pressure |
| Min Casing Thickness |
0.75in (19.05mm) |
| Corrosion Allowance |
0.125in (3.18mm) |
| Impeller Clearance |
0.030-0.050in (0.76-1.27mm) |
| Shaft Diameter at Bearings |
1.5in (38.1mm) |
| Mechanical Seal Sizes-Outboard |
1.25-1.5in(31.8-38.1mm) |
| Mechanical Seal Sizes-Inboard |
1.5in (38.1mm) |
| Mounting |
Horizontal |
| Flanges |
600# ANSI RF standard, other ratings available |
| Suction Flange |
3,6,8 inch |
| Discharge Flange |
2,4,6 inch |
| Gearbox Oil Temp Range (normal) |
120 to 140 ° f (49 to 60 ° C) |
| Minimum Gearbox Starting Temp |
32 ° f (0 °C) with light turbine oil, lower with approved synthetic oil |
| Gearbox Lubricant |
ISO Grade 32 or 46 General Purpose Oil |
| Gearbox Sump Capacity |
7 quarts (6.6 Liters) |
| Gearbox Lube System |
Pressurized |
| Gears |
Hardened and precision ground, helical AGMA class 13 |
| Input & Idler Bearings |
Spherical roller element, Min 5 year service life (input), Hydrodynamic (idler) |
| Output Bearings |
Solid Journal or Tilt Pad thrust and radial as required |
| Coupling |
Spacer Type |
| Materials of Construction |
Carbon Steel / Stainless Steel castings, 17-4PH / Titanium impellers |
