| Maximum Flow |
850acfm (1450am³/hr) |
| Maximum Speed |
34200rpm-60Hz
(33600rpm-50Hz) |
| Maximum Working Pressure |
1440psia (100bar) |
| Temperature Range |
-200 to 500°f (-130 to 260°C) |
| Maximum Motor Size |
400hp (298kw) |
| Hydro Test Pressure |
1.5 Times Maximum Working Pressure |
| Min Casing Thickness |
0.625in (15.88mm) |
| Corrosion Allowance |
0.125in (3.18mm) |
| Impeller Clearance |
0.030-0.050in (0.76-1.27mm) |
| Shaft Diameter at Bearings |
1.5in (38.1mm) |
| Mechanical Seal Sizes-Outboard |
1.25in (31.8mm) |
| Mechanical Seal Sizes-Inboard |
1.5in (38.1mm) |
| Mounting |
Vertical or Horizontal |
| Flanges |
600# ANSI RF standard, other ratings available |
| Suction Flange |
3 inch |
| Discharge Flange |
2 inch |
| Gearbox Oil Temp Range (normal) |
120 to 180°f (49 to 82°C) |
| Minimum Gearbox Starting Temp |
32°f (0°C) with light turbine oil, lower with approved synthetic oil |
| Gearbox Lubricant |
ISO VG-32 General Purpose OIl |
| Gearbox Sump Capacity |
7 Quarts (6.6 Liters) |
| Gearbox Lube System |
Pressurized |
| Gears |
Hardened and precision ground, helical and/or spur |
| Input & Idler Bearings |
Deep Groove, angular contact or solid journal as required |
| Output Bearings |
Solid Journal or tilt pad thrust and radial as required |
| Coupling |
Spline, standard flexible or space type |
| Materials of Construction |
Castings:Carbon Steel, Stainless steel; Impeller: 17-4PHSS, Titanium |
